What’s Really in Your Waterlines? Why Regulators Want Proof

Part 1 of our two-part waterline series. In Part 2, “Shock. Treat. Test.,” we get practical about the routine that keeps your lines passing.

Quick question: when was the last time anyone in your office tested the water coming out of your dental units? If you had to think about it, you’re not alone. For years, waterline testing was a “should.” In a growing number of states, it’s now a “must.”

Georgia made quarterly testing mandatory in July 2025. Washington has required it since 2021. And the question regulators are asking has changed. It’s no longer are you testing? It’s can you prove it?

Here’s why it matters. Dental unit waterlines are long, skinny tubes where water sits still for hours. That’s a perfect home for biofilm. Left alone, the water reaching your patient’s mouth can carry far more bacteria than you’d ever allow in a glass of tap water. When that goes wrong, patients pay first. Your license is next in line.

The magic number: 500

Every waterline rule in the country comes back to one number. Water used for routine, nonsurgical dental care should contain no more than 500 colony-forming units of bacteria per milliliter (CFU/mL). That’s the EPA’s drinking water standard, and the CDC and ADA have recommended it for years. For surgery, the bar is higher: sterile water only.

For a long time, that 500 lived in guidance documents. Inspectors and plaintiffs’ attorneys treated it as the standard of care, but few states actually wrote it into law. That’s changing fast, and two outbreaks explain why.

So why the sudden crackdown?

Two outbreaks nobody in dentistry has forgotten

In 2015, Georgia public health officials started tracking a cluster of serious Mycobacterium abscessus infections in kids treated at one pediatric dental practice. By early 2016, the CDC counted 20 children. Every one of them was hospitalized, typically for about a week, and 17 needed surgery.

When investigators tested the water, every one of the practice’s seven dental stations was over the limit. The average? 91,333 CFU/mL. That’s more than 180 times the standard. The practice wasn’t monitoring its water and wasn’t treating its lines daily, as the manufacturer directed.

One year later, it happened again, this time at a children’s dental group in Anaheim, California. More than 20 kids were hospitalized, and some lost permanent teeth or parts of their jawbone. The county health agency shut down the clinic’s water system. California followed with a law, in effect since January 1, 2019, requiring sterile or antimicrobial water for any procedure that exposes the dental pulp (California Dental Association).

Washington: testing every line since 2021

Washington was one of the first states to put real teeth in the rules. Its Department of Health adopted WAC 246-817-660 in January 2021, pointing directly to the Anaheim and Atlanta outbreaks. Since December 1, 2021, every waterline in every Washington dental office has to be tested. Here’s what the rule asks for:

  • Water at or below 500 CFU/mL for nonsurgical care
  • Testing on the manufacturer’s schedule, or quarterly if there isn’t one
  • A retest 5 -10 days after any repair or plumbing change, and again 21-28 days later
  • Immediate action when a test fails
  • A log of tests and maintenance, or independent lab reports, kept for five years
Georgia: the newest mandate

Ten years after its own outbreak, Georgia caught up. The Georgia Board of Dentistry’s Rule 150-8-.05 took effect July 20, 2025, and it puts the responsibility squarely on every licensed dentist. If you practice in Georgia, you need to:

  • Test at least quarterly, line by line or in pooled samples of up to ten lines
  • Retest within 30 days of any repair or plumbing change
  • Fix the problem right away when counts come back high
  • Keep a log of test dates, who ran each test, and any lab reports
  • Hang on to those records for at least five years

The Georgia Dental Association urged offices to have their first round of tests done by September 30, 2025.

They’re not the only ones

Georgia and Washington make the headlines, but other states are tightening up too:

  • California requires sterile water, or water with recognized disinfecting or antibacterial properties, for any procedure that exposes dental pulp. That rule took effect January 1, 2019, after the Anaheim outbreak (California Dental Association).
  • Maryland passed HB 499 unanimously in 2024 (Chapter 905, effective October 1, 2024). Every private dental office now has to name a licensed supervising dentist, registered with the state board, who’s responsible for all infection control in the office. In other words, someone’s name is on the line for your waterlines.
  • Georgia also requires dentists and hygienists to complete 2 hours of infection control CE that has to include dental unit waterlines (Georgia Dental Association).

In most other states, there’s no specific testing rule yet. But don’t read that as a free pass. Boards and courts still treat CDC guidance as the standard of care.

Less help from Washington, D.C.

There’s one more reason the states are stepping in. In April 2025, the CDC’s Division of Oral Health was eliminated in a federal restructuring. The Association for Dental Safety has launched an institute to pick up that work, starting with updated waterline guidance (AHCJ). Still, with less federal leadership, expect more state boards to write their own rules, and expect those rules to vary.

What will an inspector actually ask for?

Notice a pattern in the Georgia and Washington rules? The test result matters, but so does the paper trail. Here’s what an inspector or board investigator can reasonably expect to see in either state:

What they check Georgia (Rule 150-8-.05) Washington (WAC 246-817-660)
Water standard
≤ 500 CFU/mL
≤ 500 CFU/mL
Routine testing
At least quarterly
Manufacturer’s schedule, or quarterly
After repairs or plumbing changes
Retest within 30 days
Retest at 5–10 days, then 21–28 days
Pooled samples
Up to 10 lines
Up to 10 lines, number documented

Failed test

Immediate remedial action

Immediate remedial action

Records

Dates, tester names, lab reports

Log or independent lab reports

Retention

5 years

5 years

Practicing in a state without a waterline rule? You’re not off the hook. After a complaint or an infection, boards, OSHA, and courts still measure your office against CDC and ADA recommendations. And a missing log is tough to defend anywhere.

The three gaps that sink waterline programs

When waterline programs fail, it’s almost always because of one of three gaps: protection, verification, or documentation. The Georgia practice from 2015? It had all three. Lines that weren’t treated daily, no water monitoring, and no records to show otherwise.

1. The Protection Gap

Biofilm starts growing the moment water sits in the lines. Protection means keeping bacteria in check every single day, not just the week before a test.

  • Use the waterline treatment your equipment manufacturer specifies, and keep it in the water continuously.
  • Shock the lines on the manufacturer’s schedule, and any time a test fails.
  • Use sterile water for surgery, and in California, for any procedure that exposes the pulp.
2. The Verification Gap

Here’s the catch: treating your lines is something you do. A passing test is proof that it worked. Only testing tells you whether your protection is actually holding up.

  • Test at least quarterly, or on whatever schedule your state requires.
  • Retest after every repair, new chair, or plumbing change.
  • If a test fails, fix it and retest until you pass.
3. The Documentation Gap

If it isn’t written down, an inspector can’t give you credit for it. Both Georgia and Washington spell out exactly what your records need to show and how long to keep them.

  • Log every test date, who ran the test, and the lab report.
  • Record your treatments, shocks, and fixes right alongside the results.
  • Keep everything for at least five years, in one place every location can get to.

For DSOs, this is usually where things fall apart. When results are scattered across inboxes, binders, and individual office managers, pulling them together on short notice is a scramble.

The bottom line

Georgia and Washington are showing everyone where this is headed: a clear number, a fixed testing schedule, and five years of records to back it up. Each of those maps to a gap. Protection keeps the water safe. Verification proves it. Documentation shows it to the inspector. More states will likely follow, and the offices that have all three covered won’t have to scramble when they do.

Of course, knowing the standard is only half the job. In Part 2, we’ll walk through the day-to-day treatment routine that keeps your lines under 500 CFU/mL between tests, matched to your water source and test history.

Not sure where your program stands today? A compliance specialist can look at protection, verification, and documentation across every one of your locations. MCS offers that assessment. Just reach out at info@mcsteams.com.

About MCS

MCS is a leader in infection control solutions, dedicated to helping healthcare environments create safer spaces for patients and staff. With a focus on evidence-based products, proven protocols, and hands-on expertise, MCS provides practical solutions that ensure regulatory compliance while reducing the risks of healthcare-associated infections. The company partners with practices to simplify infection control and deliver peace of mind.  Explore how to upgrade your infection control strategy today. Contact MCS at info@mcsteams.com.

Sources

Scroll to Top